Advanced IMMO & Key Programming
XTOOL X100 Max key programmer can perform comprehensive IMMO functions including:
✔ Read PIN/CS(All Key Lost)
✔ Check Number of Keys
✔ Generate Dealer Key
✔ Add Keys
✔ Program New Key Fobs
✔ Key Learning
✔ Remote Learning
✔ Read Remote Frequency, Chip Type & Chip ID
✔ Key Chip Read & Write
✔ EEPROM Read & Write
✔ Transponder Read & Write
✔ Basic MCU Read & Write
✔ IMMO ECU Reset/ Adaptation
✔ IMMO ECU Refresh/ Coding
✔ for Benz FEM/ BDC Key Learning, ECU Adaptation
✔ Read & Write for Benz Infrared Key
✔ for BM-W CAS3/ 2 Key Learning
✔ for V-W/ Au-di/ Sko-da/ Se-at IMMO III/ IV/ V Add Key, All Key Lost
Topology Module Mapping
X100 Max features module topology to scan all available car modules and show color coded diagnosis status in tree mapping that reveals the underlying communication structures between modules, greatly improved repair efficiency for workshops.
Advanced ECU Coding
X100 Max can perform many advanced features, such as refresh hidden functions, disable the annoying functions, enhance vehicle performance, customize OE-settings, reprograms the adaptive data for certain components after repairs or replacements, customized configurations for high-end models and so on to enhance fuel efficiency and ensure safe driving.
X100 Max this bi-directional tool can put out the commands to ECUs, read the ecu data and monitor the operation of actuators, to precisely locate the car problems through active tests, letting you quickly know whether a specific system, component, or subsystem is functioning properly or not.
For example, If a fuel pump is not working and leads to ignition failure, it could be a faulty pump, wiring, relay, or command. By turning the fuel pump on and off via the X100 Max, you can quickly determine whether it’s a wiring, relay, or pump issue without removing any parts.
Note: Functions are not all available and vary by vehicle!!!
OE Level Full Diagnostics
Read all DTC types for full systems like ABS, SRS, TPMS, Engine, Transmission, Brake System and etc, view, graph and record data PIDs, support bi-directional controls, actuation test and all other diagnostic functions.
Displays live data in text, graph for easy data review and analysis, record and playbacks live data to pinpoint troubles of sensors and components.
AutoScan & AutoVIN: AutoVIN functions allowing you to quickly figure out Vehicle Identification No. (VIN) to perform fast diagnostic.
This comprehensive scanning process is able to locate the faulty systems and retrieve the DTCs related easily. So you can work on all parts of the vehicle systems to enhance the performance, save energy, reduce emissions, and everything else.
42 Maintenance Functions
Oil Reset - Reset the oil life systems every time the oil and oil filter are changed;
Injector Coding - Code new injector numbers to replace the previous one when fitting the new injectors or after the replacement is completed;
Brake Reset - Deactivate and activate the brake control system, assist with brake fluid control, open and close brake pads, etc.;
Battery Reset - Evaluate the battery charge state, monitor the closed-circuit current, register the battery replacement, etc.
Key Programmer - Help ECU to recognize the new keys when you need to add new keys
TPMS Reset - Tire pressure resetting is required to be performed after maintenance is performed;
Gear Learn - Perform gear learning for the car when the engine ECU, the crankshaft position sensor, or the crankshaft flywheel is replaced. match and learn the sensor. Also used to test sensors.
A/C Relearn - operation data of the compressor is reset and self-learning is performed, and the position of the servo motor is reset and self-learning, which is used to detect and verify the fault location of the air conditioning system.
HV Battery - When the new energy vehicle is faulty and repaired, it is necessary to ensure that the high-voltage battery has no power output. Through this function, the power output of the high-voltage battery to the vehicle can be disconnected, so that the maintenance worker can perform maintenance and inspection on the vehicle safely.
Write VIN - The VIN information is stored in some important ECUs of the vehicle. After replacing the ECU, it is necessary to write the VIN number of the vehicle for verification and download the relevant ECU software. (After replacing the second-hand module, you need to flash the VIN)
X100 Max also support Throttle Relearn, Disable Transportation, ABS Bleeding, Headlight, Air Suspension, DPF, EEPROM Adapter, Reset control unit, VGT Relearn, Nox Reset, FRM Reset, EGR Relearn, AdBlue Reset, SRS, Clutch Adaption, Speed Limit, ADAS, etc.
Note: ALL the service functions available vary acorss vehicles. Please come to us to check compatibility with car VINs.
More Extended Function
✔VAG Guided Function: With VAG Guide Functions, X100MAX can perform complex functions such as special functions to help your diagnostic step by step with instructions for VW, for Audi, for Skoda, etc.
✔Support CAN FD & DoIP Protocol: Access new communication protocols of CAN FD (cover for GM MY2020+ models), and DOIP (for BMW E/F/G Chassis, Jaguar, Land Rover vehicle makes).
✔Cover 1000+ Brands: Covers 10000+ Vehicles includes American, European, Asian, Japanese brands.
✔Diagnostic Report Sharing & Printing: Enables diagnostic tech or mechanics to generate diagnostic reports before and after car diagnostics and maintenance services by printing it out or sending it to customers via PDF.
✔Online Tech Support: Users can receive remote support from XTOOL technical engineers, colleagues, or friends, by allowing them to control this tablet device on their PC via the TeamViewer software.
✔ 13 Languages:Please send the Serial Number(S/N) to change English to Spanish, Portuguese, French, Japanese, German, Polish, Russian, Italian, Korean, Dutch, Swedish, etc.
High-end Key Programming Diagnostic Tool:
Operating System：Android 5.1
Processor：Quad-core processor 1.8GHz
Display：9.7-inch capacitive, 1024×768 resolution
Camera：8-megapixel autofocus rear camera with flash
Audio Input/ Audio Output：Microphone/ Loudspeaker
Ports：USB3.0/DC charging port/VGA port/DOIP port
Battery：3.7V, 10000mAh, Rechargeable Lithium-ion Battery
Input Voltage：12V DC
Relative Humidity：< 90%
Main Accessories of Package:
1*For Nissan 16+32
1*For Chrysler 12+8
1*OBD-16 & DB15 Cable
* Other Accessories:
1*FQFP64 /FQFP80 /FQFP112 /FQFP144 /FQFP176 Board
1*IC Test Stand & IC Clip Cable
1*DuPont Cable & Color Cable
If you have no special requirements, we automatically select the shipping warehouse and shipping method for you by default.
US, UK,EU Warehouse Shipping:
2-5 working days. We have stocked up hot sale items in US,UK,EU Warehouse , which is more convenient for customers. Free TAX, faster shipping with cheaper price. Orders from US,UK or EU will be delivered by US Fedex/USPS,DE DHL Post or Royalmail Hermes,DPD from US,EU, UK warehouse.
DHL Shipping: 3-7 working days, To help you clearance we will help declare a lower price on the invoice to help clearance. If address is remote area, you need pay remote freight or we will ship by Normal Post or Yanwen/EMS/Aramex Express.Please remember to leave message if you have any special requirement.
Yanwen Express: 7-15 working days, usually No Tax for European Countries or Remote Area . The tax was pre-paid, when package reached, there's no tax no extra fee for customers.Due to high custom tax in European Countries,Like United Kingdom, Germany, France, Italy, Spain, Belgium,Austria, Portugal, Hungary,etc, we will use Yanwen express or DHL.
(Default ship via DHL,if you need other shipment method , please inform us first. thank you)
Postal Service: 12-20 working days,although takes long time but also free tax
All the XTOOL tools in our site we provide one year warranty.
1. If you have any technical problem, please contact us online or by email sales@Xtooleshop.com
2. Remote help service: If your problem needs to be solved by remote help by our engineer, please download the teamviewer software, install it on your computer, then give us ID and password for remote help.
1. Damaged tool Service: If the product you received has been damaged during the shipping, please report to local DHL office/Post office immediately and ask for damage proof, then contact our website customer service for exchange service.
2. Product Quality problem for refund or exchange: If the product has any problems, please contact our customer service online within 7 days and return the item to us within 30 days upon the arrival.If you not contact us within 7 days and not return to us within 30days, it is considered as used and WE WILL NOT ISSUE YOU A REFUND OR REPLACEMENT.
3. Return Service: All returned items MUST BE in the original packaging and you need to provide us with the shipping tracking number, specific reason for the return, and also your order number. Buyer pays return shipping fee.
Join our community: